It is known that some workplaces are safer than others. Workplace safety is a kind of management responsibility in places of employment that includes health and safety of workers.
It is quite resistant to corrosion and does not oxidize easily, although it readily forms a surface tarnish of silver sulfide.
Of all the metals, it is the best conductor of electricity. Due to these qualities and its relative scarcityit is often classified along with gold and platinum as a precious metal.
Rate this link Uses of Copper - This is a collection of document tat tells how copper is used in computer, health application, electrical distribution, cars and at home. Rate this link Electrical Thesis electrical safety Different currents and voltage have different effect to human being.
Generally the current is what determines the danger to human. The used voltage with some other things for example skin resistance generally determines what is dangerous and what not.
Generally the AC voltage in A current that is less that 10 mA is not dangerous to most people. Alternating current AC in range of The impedance of muman from one hand to hand is generally in the rnage of Voltages below 20V can be considered safe to touch the current does not exceed 10 mA in normal conditions.
If the skin is dry, voltages up to aroun 80V do not cause over 30 mA current. There is a popular misconception that steady DC is worst due to its supposed ability to cause muscles to stay contracted.
This is largely untrue, and AC actually sometimes causes this. AC of power line frequencies is also more capable of disturbing your heart rhythms than steady DC or AC of higher frequencies. Electrical power distribution system design is a compromise between safety and cost.
Much of the world considers V V to be safe enough for standard residential outlets and lighting. When this high voltage is developed across the human body it could gives rise to a fatal electric shock.
Those countries which use V considered that V to be to dangerous for most residental uses. This V AC voltage is still high enough to be able to cause fatal electric shock if you touch both live and neutral wires at the same time.
Remember that electric shocks can be fatal, even for voltages of 50 V, and that most of the resistance of the body is in the skin, so do not handle electrical apparatus with wet or even damp hands.
Electricity kills a great many people worldwide every year. A current of 50mA barely enough to make a low wattage lamp even glow is sufficient to send your heart into a state called "ventricular fibrillation", where the heart muscles are all working out of synchronisation with each other.
Little or no blood is pumped, and you will die within about 3 minutes unless help is immediately at hand. Different safety measures and standard exist for this.
Insulation and grounding are two recognized means of preventing injury during electrical equipment operation. Conductor insulation may be provided by placing nonconductive material such as plastic around the conductor.
Grounding may be achieved through the use of a direct connection to a known ground such as a metal cold water pipe. The sole purpose of a safety ground in electrical wiring is to protect against hazardous fault currents - if there can be no fault than a ground is never needed.
In theory the safest electrical supply is one that is totally isolated fromits environment. In such a case you can safely connect yourself to anypart of the live circuit since there is no return path to carry a currentthrough your body.
When you touch that isolated circuit, it is no longer isolated but is tied to ground at the point of contact, with yourbody as the potential fault current path. If a fault has previouslyoccured that caused another part of the circuit to be shorted to groundthen a return path will already exist, you will complete the circuit and acurrent will pass through your body.
Whether the effect will be negligible, painful or fatal will depend only upon the fault impedences,potential difference and the current capacity of the supply.Electrical Hazards and Safety 5/3/ Electrical Hazards and Safety in Electrical Installations - Research Papers - Kksharma Login Join The Research Paper Factory Join Search Browse Saved Papers Search over , Essays Home Page» Computers and Technology Electrical Hazards and Safety in Electrical Installations In: Computers and Technology Electrical Hazards and Safety in Electrical.
Contact or locate a faculty or staff member on campus by searching our faculty and staff directory. Electrical safety is the recognition of hazards associated with use of electricity and taking necessary precautions so that the hazards do not cause injuries or death. No one could overstate the importance of Electrical Safety knowledge.
The Safety Critical Systems Handbook: A Straightforward Guide to Functional Safety: IEC ( Edition), IEC ( Edition) & Related Guidance, Fourth Edition, presents the latest on the electrical, electronic, and programmable electronic systems that provide safety functions that guard workers and the public against injury or death, and the environment against pollution.
Cornell things to do and Cornell events, powered by Localist. ELECTRICAL SAFETY HAZARDS AWARENESS THIS GUIDE SHOULD BE USED BY INSTRUCTORS TO SUPPLEMENT THE NON-ELECTRICAL WORKER TRAINING MODULE PRESENTATIONS EFCOG ELECTRICAL SAFETY IMPROVEMENT PROJECT.
Electrical Hazards Awareness Page 2 of 49 EFCOG Electrical Safety Improvement Project.